Carton belt curve：
The curved belt conveyor is driven by the side bending chain chain in the conical roller sprocket to drive the turning belt to complete the material turning transportation.
One. main mechanical structure and features:
Turning belt: adopt the special turning belt for self-mold opening.
Chain: adopt 10B-SB side bent chain.
Body: adopt 4mm steel plate to be formed by welding after cold bending.
Supporting leg: it adopts customized profile welding type, which has the advantages of firmness and good stability. Connect the frame with the connecting plate with bolts, adjust the connection between the foot base and the ground, and adjust the height of the conveying surface 50mm, as shown in the following figure:
Drive device: motor, chain drive.
Surface coating: steel wire brush and sandpaper are used to remove rust on the frame, support legs, guide parts, accessories and other parts, and the grease is removed by acid washing. After phosphating, the surface is sprayed with epoxy powder and baked. Spraying color shall be specified by party a's color card.
External parts configuration: the motor should be SEW, belt should be wynn, bearing base should be TR, bearing should be ha shaft.
Two. Main performance and parameters：
| Description The 4mm steel plate is formed after cold bending by welding, and the bracket plate is integrated 10B-SB side bent chain
| |
Type | ||
Standard | Standard | |
Outer radius （mm） | 1470 | |
Height (mm) | H(min)≥450 | |
Inner width B (mm) | 400 ≤ B ≤ 700 | |
Motor power (Kw) | 0.75 | V ≤50 m/min |
1.1/1.5 | V ＞50 m/min | |
Conveyor speed V (m/min) | V=20-100 | |
The engine bearing (Kg) | Max ≤50 | |
Angle（°） | 30°、60°、90° | |
