Pallet wrapping machine is also known as wrapping packaging machine or film wrapping machine, is the use of winding film to wrap the items of automated equipment, the machine is widely used in factories, but many users only know how to use, for the daily use of the operation of the specification know very little, today YUPACK will be based on the sum of past experience, for you to list the daily use of the pallet wrapping instructions, and hope that it will help you to help you in the future use!
I. Preparation before starting the machine
Equipment Inspection: Check whether there is any damage to the appearance of the winding machine, whether the parts are firmly connected and whether the power cord is broken.
Clean up the working area: Make sure there are no sundries around the winding machine to avoid affecting the operation and equipment running.
Confirmation of materials: Prepare the goods to be wound and the winding film, and make sure the specification of the film is suitable for the winding machine.
Operation Steps
Turn on the power: Turn on the power of the winding machine, open the switch of the equipment and wait for the equipment self-test to be completed.
Setting parameters: according to the height, diameter and winding requirements of the goods, set the parameters such as the number of winding layers, speed, up and down times on the control panel.
Place the goods: place the goods in the center of the rotary table of the winding machine, make sure the goods are placed firmly and will not be shifted when rotating.
Install the winding film: Install the winding film on the film holder, pull out the film head and fix it at the starting position of the goods.
Start winding: Press the start button, the turntable starts to rotate and the winding film starts to wind the goods. During the winding process, you can observe the winding effect and pause at any time to adjust if there is any abnormality.
End winding: When the winding is finished with the set parameters, the equipment stops automatically. Cut off the winding film and fix the film head.
Steps of shutting down the machine
Turn off the equipment: Press the stop button and turn off the power switch of the winding machine.
Clean up the equipment: Clean up the residual winding film on the rotary table and film frame of the winding machine to keep the equipment neat and tidy.
Precautions
Safety Protection: During operation, it is strictly prohibited to put your hands or other parts of your body close to the rotating parts to avoid danger.
Maintenance of equipment: Maintain the winding machine regularly, check the wear and tear of each part and replace the wearable parts in time.
Abnormal treatment: If there is any equipment failure or abnormal sound during the process of using, the machine should be stopped immediately for checking and troubleshooting before continuing to use.
To summarize, the use of the winding machine also needs to follow certain operating procedures and norms, and must not be blindly operated to cause personnel injury. For more information about our pallet wrapping machine , welcome to visit Qingdao YUPACK official website:www.yupack.com
