Bagging machine, also known as carton bagging machine, refers to the carton has been opened on the plastic film,
used for the carton packaging waterproof, moisture-proof treatment, but also can be directly filled with some liquid
or paste type of goods, but some users feedback, bagging machine occasionally have a set of bags on the case,
the following YUPACK will share with you a set of bags is not a bag of what reasons.
1、Mechanical components
(1) bag conveyor failure: If the bag conveyor rail deformation, wear, or conveyor chain jamming, slack, the bag
can not arrive at the designated location, the bag machine naturally set not on. Like track long-term use, by hard
objects scraping deformation, the bag in the operation will be offset.
(2) bag clamping claw abnormal: bag clamping mechanism of the claw if there is wear and tear, deformation, not
enough strength, it can not clamp the bag; or open and close the action of the drive device, such as cylinders,
motor failure, can not accurately control the clamping claw open and close, bag will also fail. For example, the
clamping jaws are badly worn, it is easy to slip when the bag is clamped.
(3) Component installation and calibration deviation: the installation position of the components is inaccurate,
such as bag mouth and bag placement position does not correspond to, or the machine has been used for a long
time, the components are loose and shifted, and not calibrated in a timely manner, will lead to misplaced bags,
can not be successful bagging.
The above is YUPACK from the mechanical point of view for you to summarize the bagging machine set on
the bag of three reasons, the back of the YUPACK will also be from the bag point of view, the program point of
view, respectively, and share with you the reasons for the failure of the bagging machine, you are welcome to
continue to pay attention!