Pallet roller turntable:
One. main structure and features:
Slewing mechanism: the slewing mechanism adopted in this design adopts gear type slewing bearing, which has the advantages of simple structure, high slewing accuracy, large anti-axial radial force and smooth operation. The gear type rotary bearing is placed in the middle of the bottom frame, the outer ring of the gear type rotary bearing is fixedly connected with the upper roller table machine, and the inner ring is fixedly connected with the bottom frame. The gear type rotary bearing outer ring is driven by a reduction motor mounted on the gear.
Load shifting mechanism: adopt double chain roller table machine, the specific structure is the same as the foregoing.
Accessory device: photoelectric support (detection of rotation deceleration position, accurate in place detection).
Purchased parts configuration: reducer motor SEW, chain with hangzhou donghua.
Surface coating: steel wire brush, sand paper are used to remove rust, acid wash to remove grease. After phosphating, the surface is sprayed with epoxy powder and baked. The thickness of resin is between 60 m and 90 m.
Two. Main performance and parameters：
| Description Φ89×3mm Double-sprocket roller （10A-13Z） Φ76×3mm/Φ89×3mm Side guide on roller Side profile 125×70×15×5mm External gear rotary support turntable bearings Motor mounting inside |
Type | |
Standard | Description |
Diameter Φ (mm) | For 1000*1200 pallet For 1200*1200pallet |
Height (mm) | H(min)≥550 |
Inner width B (mm) | 620 ≤ B ≤ 1520 |
Motor power P (kw) | Transfer：0.37～0.75 Rotation：0.37～0.55 |
Line speedV (m/min) | V=12 V=16 V=18 |
Rotation time （S） | 2.5(90°Single trip) |
Max payload(Kg) | Max ≤1500Kg |
