Pallet Chain Turntable:
One. main structure and features:
Slewing mechanism: the slewing mechanism adopted in this design adopts gear type slewing bearing, which has the advantages of simple structure, high slewing accuracy, large anti-axial radial force and smooth operation. The gear type rotary bearing is placed in the middle of the bottom frame, the outer ring of the gear type rotary bearing is fixedly connected with the upper chain machine, and the inner ring is fixedly connected with the bottom frame. The gear type rotary bearing outer ring is driven by a reduction motor mounted on the gear.
Load shifting mechanism: adopt chain machine, the specific structure is the same as the foregoing.
Accessory device: photoelectric support (detection of rotation deceleration position, accurate in place detection).
Purchased parts configuration: reducer motor SEW, chain with hangzhou donghua.
Surface coating: steel wire brush, sand paper are used to remove rust, acid wash to remove grease. After phosphating, the surface is sprayed with epoxy powder and baked. The thickness of resin is between 60 m and 90 m.
Two. Main performance and parameters:
| Description C10B-2 chain PE chain rail Side profile 120×70×15×4mm Aluminum terminal block External gear rotary support turntable bearings Motor mounting inside |
Type | |
Standard | Description |
Diameter Φ (mm) | For 1000*1200 pallet For 1200*1200pallet |
Height (mm) | H(min)≥650 |
Distance between two chains B (mm) | 650 ≤ B ≤ 1750（SEW motor）； 550 ≤ B ≤ 1750（Taiwan motor） |
Motor power P (kw) | Transfer：0.75～1.5 Rotation：0.37～0.55 |
Line speed V (m/min) | V=12 V=16 V=18 |
Conveyor payload(Kg) | Max ≤1500Kg |
Pallet payload（Kg） | Max ≤1200Kg |
Pallet base feet width (mm) | Min ≥100 |
