FL-5545TBD is a fully automatic and unmanned "L" type sealing and cutting machine, which is widely used in the assembly line of mass production and packaging. , especially suitable for higher and larger size products.
Features:
The sealing part is driven vertically, and the sealing contact surface is uniform. The vertical drive can overcome the problems of wrinkles and the sealing line not in the middle of the traditional "L" type automatic sealing and cutting packaging machine, and achieve excellent sealing effect.
This machine adopts the most advanced PLC programmable controller, with safety protection and alarm devices, and the sealing and cutting system can continuously and smoothly perform sealing action without replacement, and the maintenance and operation are very simple.
The feeding length is controlled by the combination of the electric eye and the timer to precisely control the length of the film.
The installation of two sets of horizontal and vertical electric eyes is convenient for switching and selection. For thin or small packages, the sealing and packaging operation can be easily completed.
The automatic coiling waste is controlled by a separate motor, which will not be too loose or too tight to be pulled apart, and the waste is easy to disassemble.
When packaging products of different heights, the lifting and lowering of the sealing knife is driven by a motor, which can be completed with the touch of a button.
According to the needs of product packaging of different sizes, the automatic air blowing function can be added.
With high and low detection memory function, greatly improve production efficiency.
SM-5030LX adopts lower air, and the air volume can be adjusted arbitrarily by the inverter.
The conveying is controlled by the frequency converter, and the speed is steplessly adjustable.
The upper part of the oven cavity can be opened for easy cleaning and maintenance.
The entire packaging process can be seen through a window on the front of the device.
Front-end power feeding line and rear-end unpowered storage platform can be selected as required
Technical parameter
Model | FL5545TBD | SM5030LX |
Machine size（mm） | 1850*1350*1300 | 1800*990*1300 |
Tunnel size（mm） | / | 1500*500*300 |
Max packing size: length+height（mm） height＜180 | ≤500 | 1300*400*250 |
Max packing size: width+height（mm） height＜180 | ≤400 | / |
Sealing knife size:length/width（mm） | 550/450 | / |
Packing speed（pc/min） | 20-35 | / |
Conveyor（m/min） | / | 0-20 |
Net weight（kg） | 800 | 650 |
Power（KW） | 2.8 | 16 |
Voltage | 220V 1PH 50HZ | 3PH 380V 50HZ |
External air source（kg/cm2） | 6-8 | / |
Shrink film | POF | POF |